Description

Epoxy compound for
conductive self-leveling floor

Purpose

Floors with requirements for protecting personnel and equipment from static discharge
Electricity is used in the electronics industry and in
computer classes, server rooms, medical facilities, and offices
diagnostics, surgeries, etc., in research centers and
laboratories. In storage and production facilities for explosive and flammable
flammable substances. The floors can withstand significant mechanical
loads are applied with high pedestrian traffic and vehicle traffic on rubber
up to 150 units per day.

SPECIAL PROPERTIES

Versatility and ease of use, as well as the properties of an electrical conductor.
Significant mechanical strength. Excellent compatibility with various
fillers. No solvents in the composition. RAL and
NCS.

RECOMMENDATIONS FOR USE

On a surface pre-primed with SPEKTRON epoxy primers
The base should be covered with copper tape around the perimeter of the room, with a margin of
0.5 meters from the walls, with connection to the grounding bus. Inside the loop, you should
attach a copper tape mesh to the side of the cell from 3 to 9 meters, and trim the edges of the mesh
it needs to be placed on the outline. When using self-adhesive copper tape with
Use a rubber roller to press the tape firmly against the floor surface.
A current-carrying primer, SPEKTRON, is applied over the finished copper circuit.
1000-03 AS with a strictly recommended consumption rate and a uniform layer thickness.
It is advisable to use nylon rollers with a pile length of 8-12 mm.
SPEKTRON 2000-03 AS is applied in 1 layer with a consumption of 2.4 kg/m2 by pouring
by spreading over the surface with a serrated spatula (rake) with a triangular
with a notch. Use a needle roller to deaerate the material.