Preparation of the material for use:
1. Mix with a special mixer attachment at 150-300 rpm.
2. Mix component A thoroughly for at least 3 minutes.
3. Pour component B into the container with component A and mix thoroughly for 2-3 minutes until the mixture is homogeneous.
4. Pour the mixture into a clean container and stir for 1 minute.
Recommendations for application:
1. Apply in 1-2 layers with a total consumption of 0.3-0.5 kg/m2 using a roller or a smooth trowel with
The interval between layers should be 8-24 hours.
Applying the base layer
Paint application is carried out in well-ventilated work areas at a base temperature of (-10)0 C to +300 C.
The composition must be thoroughly mixed before use.
Recommendations for application:
Apply to a clean, degreased surface by brush, roller, or spray gun in 1–2 coats. If the coating becomes too thick, dilute with solvent at a rate of 15–20% to achieve the required viscosity. Painting at sub-zero temperatures is permitted on dry, ice-free surfaces. The drying time of the coating film at +20°C is no more than 45 minutes.
Coating consumption: 0.05–0.25 kg/m². Clean the equipment with a solvent such as “Solvent” immediately after completion of work. Cured material can only be removed mechanically.
.svg)
20(1).png)
.png)
.svg)
.png)
20(1).png)
.svg)
English 
Russian 
Turkish 
Spanish